Hangzhou Yuanda Adhesive Material Co., Ltd.

home products Epoxy Adhesives epoxy adhesive

epoxy adhesive

Product Details:

Certification	ISO9001
Place of Origin	China
Brand Name	911
Model Number	911 two

Payment & Shipping Terms:

Minimum Order Quantity:	3,000pcs
Delivery Time:	30 days
Payment Terms:	T/T
Supply Ability:	6,000pcs/month

I'm online
Chat now!

View Contact Details

« Prev Product 1 2 3 4 5 6 7 ... Next Product »

Detailed Product Description

This is a two-part epoxy adhesive,100% solids epoxy-based system used as a high strength, cure at room temperature. It have high of adhere intensity, fast curing, bear warm, cold, water and ageing, etc. Can be used in adhere stone, installing stone curtain wall, adhere the piece of the metal and mend the stone.

Product specification:

1.It is a two-component; under room temperature fast curing.

2.Have high adhere strength, does not trickle and ooze the oil.

3.Bear water , aging and chemic corroded.

4.Bear assaulting with coldly and hotly.

5.The range of application is wide, can stick material such as stone, pottery, glass, metal, etc.

Main performance:

Project	Quote the standard	Technical parameter
Resist pressure strength, Mpa	177-5	≥80
Shear strength, (25,48h) Mpa	JC887-2001	≥12.0
Have melt by ice 48h30/3h,50/3h,50times followed, Mpa	JC887-2001	≥10
Vertical tensile strength,(25,48h) Mpa	JC887-2001	≥25
Construct temperature range		0C~65C
Performance is steady after solidification		-40C~80C

Operation method:

MixedAB=2:1. then scrawl the glue in the sticking trough, but the operating time is 2050 minutes (25), room temperature solidification is 68 hours, can reach the intensity of structure , or can lengthen solidification time when the temperature is lower in winter.

Process chart:

1.Dispose surface: Clean out surface of the sticking part which is the wall need, anchor hole and clean out, keep dry. The metal part surface should remove the rust room and galvanized layer. The slab stone surface should be cleaned out, the back should be cleaned out also. Frontispiece which is sticking should be strike roughness.

2.Sticking craft: Press A: B =2: 1Proportion scrawl on two the surface. Exert combine the surface with glue. The operating time after mixed is 2050 minutes (25). When the higher temperature, the service time is short.

Notice:

1. It should be match the glue each time, by using now;

2. When construction temperature is lower than 0 0, can be heat on the glue position, but can't be higher than 65.

3. Paste the surface must dry (the wet should be lower than 15%), the surface should not be dust, grease spot, loose and a smooth surface should make coarse to deal with, metal part surface should be removed rust layer and galvanized.

4. Store in warehouse which is dry and ventilative. After used, covered immediately.

5. Shelf life: 12 months.