Detailed Product Description

JGC2015 epoxy adhesive is a two-component, low viscosity, epoxy-based systems for use as a high strength, non-shrink, filling crack material. The penetrate ability of the product is high and could be available into the inner structure of the stone, which could improve the strength, quality of the stones greatly.

• filling cracks in Marble, Granite, Porcelain, etc
• Bonding hardened concrete to hardened concrete
• Crack repair in Concrete, etc

Mainly used in all kinds of stone materials, concrete to fill and cure, especially for curing the crack, sand hole, loose, breakage of the stones. With perfect cure performance for yellow, red stone with big defective points.

• Remove the oil, dust from the surface and keep clear, dry.
• Mix JGC by rate of A: B as 3:1 thoroughly. Spread the glue into the crack slowly. Also can dip the glue into the crack.
• Fill the crack every few minutes by 2-3 times. Polish the glue after solidifying. If permission, heat the stone to 50-60Centigrade firstly, then spread the glue and roast to speed up the solidifying.
• Spread 2 sides for thick stones. Also can press the 2 sides by vacuum to enhance the penetrating ability.
• For big cracks, add some mountain meal into the glue before spreading, which could improve the stone structure, reduce contractility.
• For broken stone, should flat and fix the two surfaces firstly, then use JGC to cure.